Penetration sealing
The gaps around each service through a fire wall or floor, closed with a tested seal.
- Every seal labelled and photographed
- BM TRADA / FIRAS-certificated contractors
- Written price before any work
A penetration is any service that passes through a fire-resisting wall or floor. Pipes, cables, cable trays, trunking, ventilation ducts, sprinkler pipes, gas pipes. Penetration sealing is the job of closing the gap around each one so that fire and smoke cannot get through, using a product tested for that exact combination of wall, service and gap.
Copper and steel pipes are usually sealed with intumescent mastic, sometimes with an intumescent wrap or a section of insulation as well, because metal carries heat through the wall and can set light to something on the far side. Plastic pipes need a collar or a wrap, because they burn away in a fire and leave a hole. Single cables and small bundles go through mastic. Cable trays and big clusters of services go through a coated fire batt, cut to fit the opening and cut again around each service, with mastic on every joint.
Ductwork is a separate case. A duct through a fire wall usually needs a fire damper, or a duct that is itself fire-resisting, and that is a ventilation specialist's job. We seal the gap around the duct where the tested detail allows it and tell you if a damper is needed.
Each finished seal gets a numbered label on the wall and a photo, and the schedule at the end lists every seal with its product and fire rating. The sealing in Reading is carried out by our BM TRADA / FIRAS-certificated contractors.

Send the postcode, the type of building and a photo of the gap with a tape measure in the shot. We reply with what it needs and a written price.